It is all about efficient wood removal…SAFELY.
Make no mistake… this carver is unlike any burr, grit wheel, or bit you ever used in your 1/4-inch flexible shaft or rotary tool. It has NO teeth, and It makes NO dust. It cuts wood VERY fast when roughing, but Its superior control lets you work confidently to final contours. It carves resinous, wet, gummy, or punky wood without loading up. You can re-sharpen it yourself in a few seconds. This tool is truly a woodcarver’s dream!
It is used like a hand gouge. The 62 RHC hard steel edge cuts the toughest hardwood, knots, and end grain! It carves off a lot or just a little, any place the cutting edge can touch. To cut, you just push it forward. The conical bevel rides on its own cutting path and power does the work. The carver is only 3/4-inch diameter, and works best at 1800 to 3600 RPM. It even works well in any electric drill. When used in a VSR flex shaft machine, it is balanced for safety up to 26,000 maximum RPM, should the speed control run away.
If your power tool is a VSR (Variable Speed Reversible) type, you can double the working life per sharpening by running both RH and LH rotation. You can also select the best speed and direction for difficult carving conditions. It is the most versatile all around power woodcarving tool available.
EVERY WOODCARVER NEEDS THIS AMAZING TOOL!
To see it in action, click on this link: https://www.youtube.com/watch?v=SSA3zEYbBJU